High boiling point DOT 3 brake fluid
Reco-Cool Brake Fluid DOT 3 is a high boiling point fluid suitable for brake systems and hydraulic clutch systems requiring FMVSS No 166 DOT 3 (ISO 4925 Class 3) fluid.
Reco-Cool Brake Fluid DOT 3 is a premium performance polyglycol ether type brake fluid which is suitable for all applications requiring a DOT 3 performance level brake fluid.
It is suitable for the following applications:
Reco-Cool Brake Fluid DOT 3 exceeds the normal requirements for Wet and Dry Equilibrium Reflux Boiling points (Wet ERBP and Dry ERBP). This helps prevent vapour lock under harsh braking conditions by dramatically reducing the likelihood of the brake fluid boiling.
Reco-Cool Brake Fluids are formulated to prevent corrosion of internal components under normal conditions of use and service.
This product is fully compatible with other similarly formulated DOT 3 brake fluids.
Reco-Cool Brake Fluid DOT 3 consists of premium components which avoid abrasion of the brake system by friction.
Elastomer seals are frequently used in braking systems to avoid fluid losses through gasket seals in the braking systems. Reco-Cool Brake Fluid DOT 3 contains ingredients which sufficiently boost seal swell, and therefore prevent fluid losses by effective prevention.
Reco-Cool Brake Fluid DOT 3 is suitable for use in applications where the following specifications are required:-
FMVSS No116 DOT 3
DIN ISO 4925 Class 3
JIS K 2233 Class 3
AS/NZ 1960 Class 1
SAE J 1703
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from your Recochem representative.
Take used products to an authorised collection point. Do not discharge into drains, soil or water.
18 Kg, 180 Kg